|
Each 3314G Series module has its own control and display panel, CC / CR / CV / CP / Dynamic modes, plug in 3302G / 3305G / 3300G mainframe with 150 sets Store / Recall memory which provides load set-up more efficiently, also can be controlled via RS232、Ethernet、USB and GPIB interface
The new Turbo mode is designed for overload or protection testing, which includes OCP, OPP, Short for AC/DC or DC / DC power source ; Over Charge / Discharge and Short for Battery BMS protection; and Blow / Not Blow testing for Fuse, Breaker or PTC Current Protection Components
Support Short, OCCP and OCDP protection tests for battery BMS protection testing, the peak current before protection and protection response time are measured
BMS, Fuse, OCP and OPP single-key test functions on the module make test more efficient
Dynamic can be simulated under CC, CP mode. The current Rise / Fall slew rate can be adjusted individually and there is an external signal input so that load can have a simulated Specific Load Current Waveform, optional 9923 Load Current Waveform Generator is able to support real current waveform testing
SHORT duration setting and SHORT_VH, SHORT_VL setting function, also can measure Short Voltage and Current
Programmable LOAD ON / OFF voltage, GO / NG meter check, Voltage meter display “ + ” or “ – “ is selectable and 150 sets Store / Recall larger memory is much advance feature for each different application
150 sets test parameter and status storage function can call the storage memory real time in accordance with the auto sequence requirement,at any time to tune out the stored memory for us |
|
|
|
|
|
3310G |
3311G |
3312G |
3314G |
3315G |
60V, 30A, 150W |
60V, 60A, 300W |
250V, 12A, 300W |
500V, 12A, 300W |
60V, 15A, 75W |
|
3310G 60V, 30A, 150W DC Electronic Load
3311G 60V, 60A, 300W DC Electronic Load
3312G 250V, 12A, 300W DC Electronic Load
3314G 500V, 12A, 300W DC Electronic Load
3315G 60V, 15A, 75W DC Electronic Load
|
|
|
|