| |
 Each 33431G Series has its own control and display panel, LED/CC/CR/CV/CP/ Dynamic modes, panel with 150 sets Store/Recall memory which provides load set-up more efficiently，also can be controlled intranet via RS232、Ethernet、USB and GPIB interface.
Short circuit test by external relay ( there is an optional fixture for short ), Short Time can be set and Short Voltage can be measured.
Built-in dimming control signal output is for PWM dimming test of LED driver.
Simulate LED forword Bias voltage (Vd) and Resistance (Rd).
Programmable Load ON/OFF voltage, GO/NG meter check, Voltage meter display “ + “ or “ – “ is selectable and 150 sets Store/Recall larger memory is much advance feature for each different application.
150 sets test parameter and status storage function can call the storage memory real time in accordance with the auto sequence requirement.
How to test the LED Driver using the 3341G Series LED DC Electronic Load Simulator
|
|
|
|
 |
)
